Beretta Web - Beretta PX4 Storm 9mm .40S&W Subcompact
Unofficial Beretta Site
....The Storm Gun Family: model
CX4 - model
PX4 - model
Px4 SC - model
RX4 - model
ARX 160
Beretta is the only firearm company in the world that designed and manufactures all three proven types of pistol locking systems:
falling block (92 series) rotary barrel (8000/PX4), and tilt barrel(PX4 SubCompact)
One locking system is not good for all...... |
|
|
| |
 |
PX4
STORM SUB-COMPACT TYPE C / D
Characteristics
Overall Length 158 mm (6.2 inch)
Overall Heights 122 mm (4,8 inch)
Barrel Length 76 mm (3.0 inch)
Sight Radius 122 mm (4.8 inch)
Grip Width 30 mm (1.2 inch)
Weight Unloaded 715 grams (25.2 ounces)
Magazine Capacity 13 rounds (9mm)
Magazine Capacity 10 rounds (40$&W) |
PX4
STORM SUB-COMPACT TYPE F / G
Characteristics
Overall Length 158 mm (6.2 inch)
Overall Heights 122 mm (4,8 inch)
Barrel Length 76 mm (3.0 inch)
Sight Radius 122 mm (4.8 inch)
Grip Width 30 mm (1.2 inch) Width at controls 36 mm (1.4 inch)
Weight Unloaded 740 grams (26.1 ounces)
Magazine Capacity 13 rounds (9mm)
Magazine Capacity 10 rounds (40$&W) |
The Beretta Px4 Storm Sub-Compact pistol is the most advanced sub-compact sidearm of its kind.
Built around Beretta’s latest Px4 modular technology, the Px4 Storm Sub-Compact delivers concealed carry handling with large frame firepower. Available in two calibers (9mm and .40 S&W), the Px4 Storm Sub-Compact uses a very reliable locked breech and tilt barrel system, providing a more compact and lighter weight system.
A stainless steel barrel requires less maintenance and is corrosion resistant, perfectly suited for concealment close to active, perspiring bodies.
The pistol adapts to different hand sizes easily with interchangeable backstraps (included).
An ambidextrous manual safety lever is positioned on both sides of the slide for easy access by all shooters.
A reversible magazine release button can be mounted on either side and can quickly be replaced by a smaller and larger size button (optional).
An interchangeable slide catch can also be replaced with an optional extended profile configuration.
A standard Picatinny Rail (MIL-STD-1913) allows for an array of aftermarket accessories.
|
| 1. PICATINNY RAIL (MIL-STD-1913): Integrated rail
allows rapid attachment of tactical lights and laser aiming
devices. |
|
| 2. SLIDE: The sides of the slide are smooth and offer snagproof
insertion and removal of the pistol from its holster. The
front and rear serrations on the slide facilitate slide operation
and safety control in moist conditions. |
|
| 3. VISIBLE AUTOMATIC FIRING PIN BLOCK: The firing
pin is blocked from any forward movement until the trigger
is pulled completely back. Even if the pistol falls and strikes
the ground, the firing pin will not strike the primer. |
|
| 4. SIGHTS: The high 3-dot sight system |
|
| 5. AMBIDEXTROUS SAFETY: Easily accessible by the thumb
of a right- or left-handed shooter, it is spring-loaded
so it’s either positively “on” or positively “off.” |
|
| 6. DECOCKING LEVER: The manual safety/hammer
decocking lever is positioned on both sides of the slide for
easy access by all shooters. |
|
| 7. INDIVIDUAL SIZE GRIPS:Pistol may be configured with
small, medium, or large backstraps to individually fit the
hand of each shooter (included). |
|
| 8. MAGAZINE CAPACITY: Increased to hold up to 13
rounds 9mm and 10 rounds .40 S&W. Full size Px4
magazines may also be used. |
|
| 9. REVERSIBLE MAGAZINE RELEASE: Multiple-sized,reversible
magazine release buttons allow for customization to the individual’s
hand size. The small size button comes standard on the gun.
Medium and large buttons are also available for easy replacement.
Each size can be positioned for right-handed or left-handed use. |
|
| 10. NO GLARE FINISH: Beretta’s exclusive Bruniton nonreflective
matte black finish is a superior corrosion-resistant
coating. |
|
| 11. PATENTED SNAPGRIP™ MAGAZINE EXTENDER: Beretta’s patented SnapGrip Magazine Extender flips down
easily, maximizing the grip for larger hands. |
|
| |
